‘Invisible’ Occupancy Sensor
A new super-flat occupancy sensor with a thickness of less than 1mm has been released by building automation specialist B.E.G. The B.E.G.
Luxomat PD11 is so thin it is almost invisible once it has been built into the ceiling but still detects motion and light within an area of up to 9m. It is the latest innovative energy-saving product to be launched by German lighting controls manufacturer B.E.G which celebrates its 40th anniversary next year.
The Luxomat PD11 maximises the use of natural daylight so that once occupancy is detected the sensor measures the natural light, compares this against the pre-determined light level and turns the fitting on if below the required level. When the natural daylight increases above this threshold, the sensor will turn the fittings off, even though movement is detected.
B.E.G. (UK)
0870 850 5412
{jathumbnail off}
Recommended Reading
Universities expand engineering apprenticeships despite Level 7 funding cut
Most leading universities plan to retain Level 7 engineering apprenticeships this autumn, despite tighter funding rules for older learners.
Data centre boom deepens UK electrical skills shortage
AI-driven data centre growth is worsening electrical skills shortages, with every UK market surveyed reporting a lack of MEP workers.
Electrical manufacturers warn uncertain project pipeline is holding back output
The latest BEAMA Market Pulse survey shows that electrical manufacturers are concerned output could be hit by growing uncertainty in construction.