Ideal for eliminating LED lamp instability
DANLERS new resistive load (RESLOADE) is designed to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps or dimmable transformers. Although RESLOADE is designed and tested for use with DANLERS trailing edge dimmers, it is also suitable for use with some other manufacturers dimmers.
RESLOADE has an operating temperature of approximately 40°C above ambient and has an effective load of 10W. It is easy to install and with its new design (dimensions 75 x 60 x 37mm) can easily pass through a 63mm ceiling cut out.
For more information:
Tel: 01249 443377
Fax: 01249 443388
Email: sales@danlers.co.uk
Website: www.danlers.co.uk
Recommended Reading
Are building operators owning their systems – or just renting access?
Who really controls a building once it is operational? Chris Timmins of IOTech Systems explores the growing case for open, edge-led systems.
ABB could have a big role to play in Rolls-Royce's SMR deployment
The exploratory MoU comes as site-specific design advances for the first three planned UK units at Wylfa.
Can automation help electrical contractors stop delays before they start?
Greg Edge, Managing Director at Edge Electrical Solutions, explores how structured data and automation can help contractors prevent costly delays.