Line impedance stabilization network
Teseq, a developer and provider of instrumentation and systems for EMC emission and immunity testing, introduces a new line impedance stabilization network (LISN) for conducted emissions testing of grid connected power conditioners (GCPC). The DC-LISN-M2-25-V1 is designed for measuring unsymmetrical disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.
Research results have shown that a typical artificial mains V-network as described in CISPR 16-1-2 cannot be used for the assessment of unsymmetrical disturbances of a photovoltaic inverter's DC port. CDNs based on IEC/EN 61000-4-6 are typical not specified for high common-mode currents and differential mode disturbances. Additionally, they are undefined below 150 kHz.
The Teseq DC-LISN-M2-25-V1 provides enhanced LISN performance with a common-mode impedance of 150 Ω and a differential-mode impedance of 100 Ω. Further, the DC-LISN offers defined termination impedance in the frequency range of 1 kHz to 150 kHz.
The DC-LISN-M2-25-V1 conforms to the requirements of AK 767-11-13-2010-0079 published in December 2010 by the German standard working group 767.11.13 - EMC of Grid Connected Power Conditioners - GCPC.
Teseq
0845 074 0660
www.teseq.com
Recommended Reading
Are building operators owning their systems – or just renting access?
Who really controls a building once it is operational? Chris Timmins of IOTech Systems explores the growing case for open, edge-led systems.
ABB could have a big role to play in Rolls-Royce's SMR deployment
The exploratory MoU comes as site-specific design advances for the first three planned UK units at Wylfa.
Can automation help electrical contractors stop delays before they start?
Greg Edge, Managing Director at Edge Electrical Solutions, explores how structured data and automation can help contractors prevent costly delays.