Powersolve Announces Dual Mains Input Redundancy Transfer Switch
Powersolve Announces Dual Mains Input Redundancy Transfer Switch
The ATS switch can be supplied with six IEC or six NEMA output sockets and these can be individually controlled, scheduled or delayed. An LCD panel displays input source, voltage, frequency and status as well as the name and current level of each output. Another display gives the status, voltage and load of each input and output, while LEDs indicate normal and warning conditions.Powersolve has added to its uninterruptible power supply product family with the launch of its ATS Series redundancy transfer switch. Operating from 110 or 220VDC, it is a dual mains input device that will automatically switch between inputs if one fails, to ensure mains power continuity. Switching or transfer time is less than 6ms and the unit automatically matches the phase frequency and polarity when switching.
Remote monitoring is possible with SNMP Intelligent Slot and RS232 Interface. The unit measures 440 x 250 x 44mm, weight is 3.2kg and operating temperature range is 0 to 40⁰C.
More about Powersolve at www.powersolve.co.uk
Recommended Reading
Invinity warns UK investment could move overseas after Ofgem LDES selections
Invinity is reconsidering its UK investment plans after only one of the projects using its technology entered Ofgem’s provisional Window 1 portfolio.
.jpg%3F2026-08-24T08%253A44%253A01.948Z&w=3840&q=100)
UK Government launches £28m challenge for 100-hour energy storage
The Government is backing electrochemical and hydrogen storage technologies designed to supply energy over periods of at least 100 hours.
Parliamentary petition seeks to limit BESS installations to AI Growth Zones
A proposed BESS moratorium outside AI Growth Zones risks treating grid-scale storage as an adjunct to data centres, not critical infrastructure.