Mains power surge protection
Making the correct selection of surge protection devices (SPDs) for protecting your business is far easier than many people think.
Making the correct selection of surge protection devices (SPDs) for protecting your business is far easier than many people think.
Where the building has an external lightning protection system, overhead supply lines or equipment at risk of a direct lightning strike, Type 1 lightning current arrestors should be used. The Type 1 DEHNventil range meets the requirements of BS EN 62305.
The Type 1 device is followed by a fully co-ordinated surge protection system consisting of Type 2, and located at the terminal equipment Type 3 SPD’s. Each device plays a critical role in protecting the electronic equipment within the structure.
The modular DEHNrail range of Type 3 SPD’s cover a wide range of voltages suitable for Single and Three Phase systems.
Dehn (UK)
01484 859 111
www.dehn.co.uk
Recommended Reading
Government considers mandatory EV chargers in covered car parks
Proposed changes to England’s building regulations could require EV chargers in covered car parks.
Fuuse and Drax to support 14,000-plus BP Pulse charging sockets
Almost 1,000 BP Pulse fleet charging customers will be able to retain compatible hardware as they move to new software and maintenance providers.
The real test of EV charging begins after handover
Harry Capewell, Director at EVFM, explains why future-proofing apartment EV charging means planning for changing demand long after installation.