Flexible Integration with CAN
Wago's new 750-658 I/O module enables CAN field devices to be linked to its I/O-SYSTEM 750.
The new CAN I/O module supports CAN Layer 2, making it extremely flexible at the field level.
This module can be configured to integrate with CANopen, supporting SAE-J1939 or DeviceNet, with protocol-specific functions being implemented using an application program on the many WAGO Series 750 controllers. The 750-658 CAN I/O module adjusts to baud rates between 20 kbit/s to 1 Mbit/s using automatic bit rate detection. A fixed transmission rate can also be set. Using six configurable filters for input telegrams, CAN messages can be filtered by means of identifier formats 2.0A (11-bit identifier) and 2.0B (29-bit identifier).
01788568008
Recommended Reading
EZO secures €150m debt facility for 3,000+ EV charge points
The financing will support more than 100MW of charging capacity across the UK and Ireland over the next three years.
Aegis starts construction of multi-energy commercial vehicle charging hub
Aegis expects the site to open in spring 2027, with 72 van bays and 30 truck bays at full build.
£190m motorway charging scheme may not protect grid capacity for electric HGVs
The scheme includes future eHGV demand when sizing motorway grid connections, but the allocation rules don't ring-fence any of that capacity.