Battery-operated hydraulic crimping tool for high-voltage contacts
Harting has expanded its range of crimping tools for Han high-voltage contacts with the addition of a battery-driven hydraulic crimping tool which simplifies and accelerates the contact assembly process.
Using the new battery-driven hydraulic crimping tool, crimp contacts can be made with cable cross-sections of between 10 mm2 and 240 mm2. For cable cross-sections between 10 mm2 and 150 mm2, the existing pressure dies of the manual crimping tool are used and inserted into the appropriate die holder. For crimping cable cross-sections between 185 mm2 and 240 mm2, special crimping dies inclusive of the die holder are available.
Because of the construction of the die holder and pressure die, it is easy and quick to switch to a different cable cross-section. The crimping tool is supplied with a battery charger and a second battery, which is especially helpful for large-volume crimping operations.
The new tool can be used with HARTING’s Han® TC 70, TC 100, TC 200, TC 250, TC 350 and TC 650 contacts, and is designed for crimp geometry as specified by DIN 46 235, with a pressing force of 130 kN.
+44 (0) 1604 827500
Recommended Reading
National Wealth Fund backs proposed £20m Invinity raise after UK investment warning
The battery manufacturer has earmarked £2 million for UK and US manufacturing, but has not specified how much will be invested in Britain.
Storage needs to move beyond the megawatt headline
The UK needs more battery storage, but megawatts alone don't tell the whole story. Location, duration and grid value must shape what gets built.
Steeple solar and battery project approved to use West Burton grid capacity
The Nottinghamshire development will combine 450MW of solar generation with 150MW of battery storage.