Shallow grid modules for easy fit solution
Hager claims its new sollysta grid wiring accessories are the easiest on the market to install. The modules have the shallowest projection currently available, at just 10mm from the faceplate, to maximise cabling space in the back box.
For installation the modules clip in from the front of the metal frame rather than the back. This makes them easy to fit and to replace and ensures that you cannot push them into the back box.
Wiring is also simplified with the terminals all facing upwards for easier orientation with lead ins to guide the screwdriver, backed off screws held captive, wire end stops and clear white labelling off a dark grey background.
The frame is rigid to avoid deformation during installation and its design even makes it possible to access the switch terminals after you have fitted the switches in to the frame.
Hager
01785 255146
www.hager.co.uk
Recommended Reading
National Grid secures approval for three 400kV substations
The substations will enable National Grid to uprate two existing transmission routes from 275kV to 400kV, adding 3 GW of network capability.
Scotland puts 50 MW data centres under closer planning scrutiny
Scotland is tightening oversight of large data centres, with councils now required to notify ministers of applications above 50 MW.
Grid capacity moves up the agenda under new planning rules
New planning rules make grid capacity harder to ignore when shaping growth, but developers still face uncertainty over when power will be available.