Rittal Launch New TopTherm Condensate Evaporator
Rittal's new TopTherm evaporator is designed to be used in conjunction with an enclosure air conditioner where condensation is required to be evaporated into the ambient air rather than allowed to drain onto the floor.
A simple and very effective condensate management system, based on Rittal’s innovative platform design, that is installed just below the cooling units, operates on a float arrangement. Condensate is collected until a limit is reached thereby triggering a heating element, which evaporates the water back into the atmosphere.
Mounted to the side of an enclosure, the condensate evaporator is available in 230V or 115 volt and is produced in RAL 7035 to match the colour of existing components and is complete with wiring diagram and screws for ease of installation. The units are available from stock ready for shipment.
Recommended Reading
Electrical safety doesn’t end with the inspection
Dan Sedgwick argues that electrical safety depends on more than the inspection – the records must survive long enough to support what comes next.
Are building operators owning their systems – or just renting access?
Who really controls a building once it is operational? Chris Timmins of IOTech Systems explores the growing case for open, edge-led systems.
ABB could have a big role to play in Rolls-Royce's SMR deployment
The exploratory MoU comes as site-specific design advances for the first three planned UK units at Wylfa.