Fryolux Solder Paint from the Solder Connection
Fry's Fryolux Solder Paint is now available, nationwide, from the Solder Connection of Chepstow.
Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.
Proven over many years, Fryolux's popularity lies in the facts that it is both convenient and economical to use. It is applied easily by brush swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and as the solder and flux are both applied at once it saves time.
Stocked in three sizes, 125gm, 250gm and 2.5kg, Fryolux is available in Pure Tin, for applications where the use of lead is prohibited, SN60/Pb40 for general use and SN40/Pb60 that has a lower melting temperature range. See more details at http://www.solderconnection.com/
Tel: +44(0)1291 624400
Fax: +44(0)1291 627700
Recommended Reading
Government considers mandatory EV chargers in covered car parks
Proposed changes to England’s building regulations could require EV chargers in covered car parks.
Fuuse and Drax to support 14,000-plus BP Pulse charging sockets
Almost 1,000 BP Pulse fleet charging customers will be able to retain compatible hardware as they move to new software and maintenance providers.
The real test of EV charging begins after handover
Harry Capewell, Director at EVFM, explains why future-proofing apartment EV charging means planning for changing demand long after installation.