Reliable isolation protection
Rittal RiLine NH on-load isolators provide safe, reliable isolation protection from down-stream electrical equipment. Available either with or without fuse monitoring, the isolators range from 100 to 630 amps (60mm), sizes 000 to 3 and can be easily mounted directly onto Rittal's range of busbar systems.
Utilising either the electronic or electromechanical fuse monitoring allows quick fault diagnostics. If a fuse blows, a signal is immediately sent to advise of the need for quick replacement without effecting plant availability. The fitting of a micro switch indicates the switching position of the isolator lid to the control desk/room. The cable outlet may also be swapped from the top to the bottom using the same device thereby cutting warehouse costs by up to 50%.
Rittal
01709 704000
Recommended Reading
Why electrical systems must be designed to fail safely
Electrical resilience is tested when things go wrong, not when they run smoothly, argues Cressall Resistors' Mike Torbitt.
Retrofitting is no longer just about sustainability
Rising costs and aging systems make retrofitting urgent, says Schneider Electric's Alice Williams. The answer isn't always wholesale replacement.
Why green technology demands a new approach to electrical safety
As buildings generate, store and consume power in new ways, Richard Winter explores why electrical safety needs to evolve with electrification.