Electrical Review

Thu07242014

Last update09:42:38 AM GMT

Cables and Cable Management
High standards for new Acute Hospital PDF Print Write e-mail
Product News
Written by Neil Coshan   
Wednesday, 07 March 2012 15:21

Prysmian’s FP Plus, with enhanced Insudite insulation, cables were used exclusively for the fire system installed in the New Acute Hospital for the Southwest in County Fermanagh, Northern Ireland.

Since the project began in 2009, approximately 100,000 metres of cabling has been installed by Dowds Electrical contractors, connecting the extensive fire alarm system and other life safety systems such as Smoke Fire Dampers throughout the building.

Read more...
 
Black out cabling solution for BSF scheme PDF Print Write e-mail
Product News
Written by Neil Coshan   
Tuesday, 06 March 2012 12:46

Marco has supplied it’s Elite trunking in charcoal grey as part of a new blackout drama room at Farnley Park High School, Leeds.

The £23m Building Schools for the Future programme is being carried out by Interserve, will see a host of new facilities for the secondary school. Marco is supplying cabling solutions to the electrical contractor across the large scale site and developed a bespoke colour specification to blend seamlessly with the new drama centre.

Read more...
 
Eland Cables announce Firecel cables range PDF Print Write e-mail
Product News
Written by Neil Coshan   
Tuesday, 15 November 2011 10:36

 

Eland Cables are proud to announce the addition of Firecel Cables to their electrical cables range. Firecel SR 114H Standard Cable, and Firecel SR 114E Enhanced Cable are high quality fire resistant cables, ideal for use in fire detection systems, alarms, emergency lighting circuits and for applications requiring fire survivability.

Firecel 114H Standard is tested to ensure compliance of BS EN 50200 circuit integrity for 30 mins (PH30) and 60 mins (PH60) for 1.5mm² and above. Firecel 114H is also certified to pass BS EN 50200 Annex E for 30 mins. Firecel 114E Enhanced is designed to survive over 120 minutes (PH120) as well as meeting the requirements for BS. Both Firecel Cables also conform to BS 7629-1:2008 and BS 5839-1:2002, and are LPCB Approved.

Eland Cables’ Quality Assurance Manager Nicholas Wakefield says “We are pleased to bring to our customers a fire performance cable that has undergone advanced testing to ensure the quality you would expect from Eland. Nowhere could this be more important than in safety critical systems.”

Eland Cables, international cable supplier, is committed to supplying cables of outstanding quality. To accompany the addition of Firecel Cables to their range, they have created a dedicated website resource for customers, supplying cable specifications, features, and FAQ’s.

For more information, please visit www.firecel.co.uk call 020 7241 8747, or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

 
Save time and money PDF Print Write e-mail
Product News
Written by James Pearson   
Tuesday, 13 September 2011 00:00

The new Memshield 3 cable trunking interface kit from Eaton's electrical sector makes it easy to save time and money when making cable cut-outs during the installation of distribution boards. When installation is complete, the kit also provides simple but effective mechanical protection for the cables against damage caused by the sharp edges of cut steel trunking, eliminating the need for users to rely on inconvenient custom solutions.

Read more...
 
Power cables for Riffgat offshore wind farm PDF Print Write e-mail
News
Written by James Pearson   
Tuesday, 30 August 2011 00:00

Nexans has been awarded a contract by project developer Offshore-Windpark RIFFGA KG, owned by Enova and EWE ENERGIE, to supply and install the infield submarine power cables and ancillary equipment for the Riffgat offshore wind farm currently under construction 15 km northwest of the German island of Borkum.

Read more...
 


Page 9 of 16